Recommended equipment: food oven (adjustable electric power)
Characteristic
This control is mainly applied to electric power oven, by using high performance microcomputer control technology; MOC-100 food machinery hopper rotary oven controller has advantages of high precision of temperature control, convenient data storage and easy setting and operating. TOC-810 oven controller adopts double display window up & bottom temperature display, advanced balance power output heating control, count-down baking and steam time control, is applied to high-end food oven with complete function.
1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Digitron and indicator light combined display working and alarm state;
3）、PID adjusting temperature, fuzzy control mode;
4）、Twelve baking data storage, with corresponding key-press;
5）、Password setting and data locking avoid operator changing information at will;
6）、Multiple password protection setting;
7）、Temperature display range: 0～400℃;
8）、Range of temperature control: 0～380℃;
9）、Baking setup time 0～2 Hours;
10）、Steam jet delay time (0～2 hour, setting in time-window);
11）、Steam jet duration (0～99 Min);
12）、Temperature error shift correction;
13）、Upper limit temperature deviation setting;
14）、Heating thermal inertia setting;
15）、Upper temperature limit alarm;
16）、Temperature limit alarm;
17）、Thermocouple channels disconnection alarm.
2、Technical parameter
1）、Temperature, baking temperature, steam temperature, storage number and output actions showed respectively on digitron and indicator light.
2）、Output control:
Lighting output one-channel;
Alarm output one-channel;
Fan output one-channel;
Standby output one-channel;
Exhaust output one-channel;
Pumping output one-channel;
Overtemperature alarm output one-channel;
Steam jet output one-channel;
Steam heating output one-channel;
Bottom SSR output one-channel;
Up SSR output one-channel.
It adopts fire regulating mode to control up & bottom temperature, resulting in frequent on-off, so we might consider using solid relay to control up & bottom layer heating, this method has longer heating control life-span than AC contactor, you can choose 15、16 terminal or 19~22 terminal.
3）、Input control:K index thermocouple input three-channel;
4）、Working power:50～60Hz AC110V±10% or 50～60Hz AC220V±10%.
1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.
2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、It is necessary to avoid controller being installed too close to AC accessories: contactor, transformer, and so on; the controller must be kept away from strong electromagnetic field environment, for avoiding unnecessary interference and affecting the normal work.
3）、Please have regular maintenance to ensure controller works without accident.
3、Iron plate overall dimension, installation drawing
