TOC-660 oven controller

1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Digitron and indicator light combined display working and alarm state;
3）、Nine groups data parameter storage;
4）、Password setting and data locking avoid operator changing information at will;
5）、SSR pulse regulation temperature control, 9 sections adjustable;
6）、Baking time range: 0～99 Min, timing precision: 1 Sec, count-down;
7）、Steam heating temperature range: 0～300℃ (internal parameter setting);
8）、Steam output time range: 0～99 Sec, setting accuracy: 1Min, count-down;
9）、Temperature control: PID parameter fuzzy control;
10）、Intelligent light control time;
11）、Temperature thermocouple input;
12）、Intelligent alarm.

2、Technical parameter
1）、Actual temperature, setting temperature, baking time and actions showed respectively on digitron and indicator light.
2）、Output control:( switch output)
        Up SSR output one-channel;
        Bottom SSR output one-channel;
        High temperature alarm output one-channel;
        Steam heating output one-channel;
        Steam output one-channel;
        Standby output one-channel; 
        Lighting output one-channel;
        Power Sync output one-channel.
3）、Input signal
        Up thermocouple input one-channel;
        Bottom thermocouple input one-channel;
        Steam thermocouple input one-channel;
        Standby input one-channel;
4）、Working power:50～60Hz　AC220V±10%.
 

1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.
Notice: Improper operation may cause hazards, including personal injury or equipment accident.

2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、It is necessary to avoid controller being installed too close to AC accessories: contactor, transformer, and so on; the controller must be kept away from strong electromagnetic field environment, for avoiding unnecessary interference and affecting the normal work.
3）、Please have regular maintenance to ensure controller works without accident.

3、Iron plate overall dimension, installation drawing
Panel dimension  310mmX140mm
Housing dimension  275mmX110mm