|
TOC-630 oven controller
Recommended equipment: food oven (Electric, Gas)
Characteristic
This controller is mainly applied to electricor gas oven. By using high speed CPU chip design, TOC-630 oven controller has advantages of fast speed, precision control, good stability, convenient data storage and easy setting and operating. It adopts PID heating control, count-down baking time and steam time mode, has relay switch quantity controller output, LED luminescent tube coordination indication on action panel, host computer and slave computer communication, unique narrow design, novel and fashion look. 1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Digitron and indicator light combined display working and alarm state;
3）、Nine groups data parameter storage, with corresponding key-press;
4）、Password setting and data locking avoid operator changing information at will;
5）、Range of temperature control: 0～400℃;
6）、Baking setup time 0～99Min, setting accuracy: 1Min, count-down;
7）、Steam time range: 0.0～9.9 Sec, setting accuracy: 0.1Min;
8）、Temperature control: PID control;
9）、Intelligent light control time;
10）、Cooling fan intelligent control;
11）、Temperature thermocouple input;
12）、Intelligent alarm.
2、Technical parameter
1）、Digitron and indicator light combined display temperature, time and actions state;
2）、Output control:( switch output)
Up heating output one-channel;
Bottom heating output one-channel;
Steam heating output one-channel;
Steam throttle valve output one-channel;
Lighting output one-channel;
Steam output one-channel;
Alarm output one-channel.
3）、Input signal
Up thermocouple input one-channel;
Bottom thermocouple input one-channel;
Steam thermocouple input one-channel;
4）Working power:50～60Hz AC220V±10%. 1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.
Notice: Improper operation may cause hazards, including personal injury or equipment accident.
2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、It is necessary to avoid controller being installed too close to AC accessories: contactor, transformer, and so on; the controller must be kept away from strong electromagnetic field environment, for avoiding unnecessary interference and affecting the normal work.
3）、Please have regular maintenance to ensure controller works without accident.
3、Iron plate overall dimension, installation drawing
Panel dimension 90mmX366mm
Housing dimension 58mmX298mm
|
