TOC-600B oven controller

1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Digitron and indicator light combined display working and alarm state;
3）、PID regulation, fuzzy temperature control mode;
4）、Password setting and data locking avoid operator changing information at will;
5）、Multiple password protection setting;
6）、Temperature range: 0～400℃;
7）、Range of temperature control: 0～300℃;
8）、Baking setup time 0～60Min;
9）、Steam setup time 0~99 Sec;
10）、Lighting timing setup 0～9.9 Min;
11）、Exhaust valve timing setup 0～9 Min;
12）、Temperature error shift correction;
13）、Upper limit temperature deviation setting;
14）、Heating thermal inertia setting;
15）、Upper temperature limit alarm;
16）、Temperature limit alarm;
17）、Thermocouple channels disconnection alarm.

2、Technical parameter
1）、Actual temperature, setting temperature, baking, steam time and actions showed respectively on digitron and indicator light.
2）、Output control:( switch output)
        Up heating output one-channel;
        Bottom heating output one-channel;
        Steam output one-channel;
        Lighting output one-channel;
        Power switch output one-channel;
        Standby output one-channel.
3）、Input signal
        K-type thermocouple input duplex;
        Oven door switch input one-channel;
        Standby input one-channel.
4）、Working power:50～60Hz　AC220V±10%.

1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
Notice: improper operation may cause hazards, including personal injury or equipment accident.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.

2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、This system adopts high-performance MCU control technology, has advantages of high precision of temperature control, easy setting and operating. It adopts advanced PID two channels temperature control mode and count-down time control.
3）、Please have regular maintenance to ensure controller works without accident.

3、Iron plate overall dimension, installation drawing