|
BOC-120 oven controller
Recommended equipment: food oven (Electric, Gas)
Characteristic
This controller is mainly applied to electric or gas oven, adopts LCD panel display and high speed CPU chip design, and has advantages of high precision of temperature control, convenient data storage and easy setting and operating. BOC-120 oven controller adopts balance power heating mode temperature control, count-down time control, rich fifty temperatures and time parameter storage, and later twenty-five temperatures division control design. BOC-120 oven controller can meet the needs of high-level users with complete functions. 1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Liquid crystal and indicator light combined display working and alarm state;
3）、88 temperatures and time baking data storage;
4）、Password setting and data locking avoid operator changing information at will;
5）、Balance power temperature control mode;
6）、Multiple password protection setting;
7）、Temperature range: 0～400℃;
8）、Range of temperature control:0～300℃;
9）、Baking setup time 0～99Min;
10）、Lighting timing setting0～9.9Min;
11）、Steam timing setup 0～99Sec;
12）、Manual & automatic operation;
13）、Temperature error shift correction;
14）、Upper limit temperature deviation setting;
15）、Heating thermal inertia setting;
16）、Upper temperature limit alarm;
17）、Temperature limit alarm;
18）、Thermocouple channels disconnection alarm
2、Technical parameter
1）、Liquid crystal and indicator light combined display working and alarm state.
2）、Output control:( switch output)
Up heating output one-channel;
Bottom heating output one-channel;
Steam heating output one-channel;
Steam output one-channel;
Lighting output one-channel;
Alarm output one-channel;
Power Sync output one-channel;
Control output reserved three-channel;
3）、Input signal (except thermocouple, the input signal disconnection is effective)
K-type thermocouple input duplex;
Door switch signal input one-channel;
Standby input two-channel;
4）、Working power: 50～60Hz AC110V±10% or 50～60Hz AC220V±10%.
1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
Notice: improper operation may cause hazards, including personal injury or equipment accident.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.
2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、It is necessary to avoid controller being installed too close to AC accessories, such as contactor, transformer, and so on, for avoiding unnecessary interference.
3）、Please have regular maintenance to ensure controller works without accident.
3、Iron plate overall dimension, installation drawing
|
